Std 3 TCP/IP DPL Wireless for Hyosung

This article is intended for the confidential and exclusive use of Switch Commerce, LLC and direct customers of Switch Commerce, LLC. It is not to be reproduced or redistributed without the express written consent of Switch Commerce, LLC. Copyright © 2021. Switch Commerce, LLC. All Rights Reserved.

Enter, Clear, Cancel, 1, 2, 3

1. Customer Setup
   • Communication
   • TCP/IP
   • Message Format
   • Standard 3 (Required)
   • TCP/IP Type
   • SSL Option - Disabled
   • Standard TCP/IP
   • Status Monitoring - Enabled
   • Communication Header - Enabled
   • Communication ID - 123SC101
   • CRC - Disabled
• Select Processor or Select Host
• Standard 3 Option
2. Host Setup
   • Use URL - Disabled
     • Host URL #1 - 192.168.0.52
     • Port #1 - 8000
     • Host URL #2 - 192.168.0.52
     • Port #2 - 8000
   • Host Address
   • Disabled
   • Secure Mode Password
     • Serial Number - 0000000000000 or Terminal Serial # (if empty)
     • Key Mode - TDES
     • Edit Key
       • Key Index - 01
       • Key Entry - A/B
       • Key Index - 01
       • Key Entry - A/B
     • Key Part A
     • Key Part B
   • Password #1 - Default 000000
   • Password #2 - Default 000000
• Host Address
• Terminal ID - NH _ _ _ _ _ _
• Health Check Message
• Key Management
3. System Setup
   • DHCP - Disabled (for Static IP)
   • IP Address - 192.168.0.55
   • Subnet Mask - 255.255.255.0
   • Default Gateway  - 192.168.0.52
   • DNS - (Leave as is)
• Terminal IP or ATM IP Setup

Exit out of Operator Functions, powerfail the ATM, look for the welcome screen try a test transaction.