Wireless DPL - Phone Line for Genmega/Hantle/Tranax

This article is intended for the confidential and exclusive use of Switch Commerce, LLC and direct customers of Switch Commerce, LLC. It is not to be reproduced or redistributed without the express written consent of Switch Commerce, LLC. Copyright © 2021. Switch Commerce, LLC. All Rights Reserved.

Genmega/Hantal/Tranax Standard 3

Applicable:  C4000, 1700W

Enter, Clear, Cancel, 1, 2, 3

Default Master Password = 555555

1. Customer Setup

• Change Processor
• Communication - Modem
• Message Format - Standard 3 Option
• Standard 3
• Comm Header - Enabled
• Communication ID - 123SC101 (only if available)
• Status Monitoring - Enabled
• 12 Seq Number - Disabled
• Use TCP/IP CRC - Enabled

2. Host Setup

• Host Phone Numbers

• Host Phone 1 - 5550120
• Host Phone 2 - 5550120

• Configuration - Scheduled
• Routing ID
• Change Routing ID - 123SC101 (000000 if communication id is available)
• Terminal Number
• Change Terminal # - TX _ _ _ _ _ _
• Health Check
• Host Send
• Disabled
• Key Management
• Enter Secure Passwords #1 & #2
• Key Mode
• TDES
• Edit Master Key
• Key Part A
• Key Index - 01
• Key Entry - A/B

Note: Press these buttons for Letters:<=A , >=B, Blank=C, Cancel=D, Clear=E, Enter=F

• Key Part B
• Key Index - 01
• Key Entry - A/B

Exit out of Operator Functions, look for the welcome screen and try a test transaction.