TCP/IP Internet Passthrough Box for Triton

Triton

Notes taken on a RL5000

Applicable: RL2000, RL5000, RL1600, ARGO

Blank Button (bottom right) + 1

Main MENU > 5. Parameters > 1. Date/Time

1. Set Date
2. Set Time

MAIN MENU > 6.TERMINAL CONFIGURATION > 6.COMMUNICATION

F4. Enable SSL - CHECKED

8. Communication Protocol - TCP/IP
9. Host Address - atm1.switchcommerce.net
10. Host IP Port - 1440
11. Permanent TCP/IP Connection - UNCHECKED
12. Enable Communications Header - CHECKED
13. 123SC101
14. User 12 Digit Sequence Number - UNCHECKED
15. Communication Message Format - Triton Standard or TDL
16. Host Response Timeout - 120

F1. Enable Persistent Reversals - UNCHECKED

F3. Enable Reversals For Protocol Errors - CHECKED

MAIN MENU > 6, TERMINAL CONFIGURATION > 0, MORE OPTIONS > 5.  EMV CONFIGURATION

1. EMV Processing must be checked
2. All AIDs should be checked

MAIN MENU > 6.TERMINAL CONFIGURATION > 1.GENERAL PARAMETERS

1. Terminal ID - TR _ _ _ _ _ _
2. Status Monitoring - CHECKED
3. Heartbeat Message - CHECKED

F1. Heartbeat Delay Period - 480

MAIN MENU > 7. Key Management > 1. Enter Master Keys

Enter Master Key Passwords #1 and #2

Enter Master Keys - A/B  A/B

MAIN MENU > 2. Diagnostics > 7. Modem / Ethernet > 6. Configure Settings

Note: The customer has the choice of running the terminal on a Static IP or DHCP. If the customer does not have a need to run the terminal using static IP then DHCP will work. (The locations Internet connection may require the terminal to setup on Static IP. Static IP information must be provided by the location’s system administrator or Internet provider.)

6. Enable DHCP - CHECKED

OR

6. Enable DHCP - UNCHECKED (for Static IP)
7. IP Address - (Example: 10.101.1.175)
8. Subnest Mask - (Example: 255.255.255.0)
9. Default Gateway - (Example: 10.101.1.1)
10. Primary DNS - (Example: 10.101.1.10)

MAIN MENU > 5. System Parameters > 5. Restart Terminal

Note: Skip this step if you are setting the terminal up DHCP.

MAIN MENU >  7. Key Management > 2. Download Working Keys

Exit out of Operator Functions, look for the welcome screen, and try a test transaction.

This article is intended for the confidential and exclusive use of Switch Commerce, LLC and direct customers of Switch Commerce, LLC. It is not to be reproduced or redistributed without the express written consent of Switch Commerce, LLC. Copyright © 2021. Switch Commerce, LLC. All Rights Reserved.