TCP/IP Opt Connect & Systec Wireless for Triton

Triton

Notes taken on a RL5000

Applicable: RL2000, RL5000, RL1600

Blank Button (bottom right) + 1

MAIN MENU > 6.TERMINAL CONFIGURATION > 6.COMMUNICATION

8. Communication Protocal - TCP/IP
9. Host Address - 192.168.1.90
10. Host IP Port - 7003
11. Permanent TCP/IP Connection - UNCHECKED
12. Enable Communications Header - Checked
13. 123SC101
14. User 12 Digit Sequence Number - UNCHECKED

F4. Enable SSL - UNCHECKED

9. Communication Message Format - Triton Standard
10. Host Response Timeout - 120

F1. Enable Persistent Reversals - UNCHECKED

F3. Enable Reversals for Protocol Errors - CHECKED

MAIN MENU > 6.TERMINAL CONFIGURATION > 1.GENERAL PARAMETERS

1. Terminal ID - TR _ _ _ _ _ _
2. Status Monitoring - CHECKED
3. Heartbeat Message - CHECKED

F1. Heartbeat Delay Period - 480

MAIN MENU > 7. Key Management > 1. Enter Master Keys

            Enter Master Key Passwords #1 and #2

Enter Master Keys - A/B  A/B

MAIN MENU > 2. Diagnostics > 7. Modem / Ethernet > 6. Configure Settings

6. Enable DHCP - UNCHECKED
7. IP Address - 192.168.1.91
8. Subnet Mask - 255.255.255.0
9. Default Gateway - 192.168.1.90

MAIN MENU > 5. System Parameters > 5. Restart Terminal

MAIN MENU >  7. Key Management > 2. Download Working Keys

To 

Exit out of Operator Functions, look for the welcome screen, and try a test transactional . 

This article is intended for the confidential and exclusive use of Switch Commerce, LLC and direct customers of Switch Commerce, LLC. It is not to be reproduced or redistributed without the express written consent of Switch Commerce, LLC. Copyright © 2021. Switch Commerce, LLC. All Rights Reserved.