Std 3 TCP/IP Opt Connect & Systec Wireless for Hyosung

This article is intended for the confidential and exclusive use of Switch Commerce, LLC and direct customers of Switch Commerce, LLC. It is not to be reproduced or redistributed without the express written consent of Switch Commerce, LLC. Copyright © 2021. Switch Commerce, LLC. All Rights Reserved.

Nautilus Hyosung

Notes taken on a 5000CE

Applicable: NH-1800CE, NH-5000CE

Enter, Clear, Cancel, 1, 2, 3

1. Customer Setup
• Select Processor or Select Host
• Communication
• TCP/IP
• Message Format
• Standard 3 (Required)
• TCP/IP Type
• SSL Option - Disabled
• Visa Framed TCP/IP
• Standard 3 Option
• Status Monitoring - Enabled
• Communication Header - Enabled
• Communication ID - 123SC101
• CRC - Disabled
2. Host Setup
• Host Address
• Use URL - Disabled
• Host Address
• Host URL #1 - 192.168.1.90
• Port #1 - 7003
• Host URL #2 - 192.168.1.90
• Port #2 - 7003
• Terminal ID - NH _ _ _ _ _ _
• Health Check Message
• Disabled
• Key Management
• Secure Mode Password
• Password #1 - Default 000000
• Password #2 - Default 000000
• Serial Number - 0000000000000 or Terminal Serial # (if empty)
• Key Mode - TDES
• Edit Key
• Key Part A
• Key Index - 01
• Key Entry - A/B
• Key Part B
• Key Index - 01
• Key Entry - A/B
3. System Setup
• Terminal IP or ATM IP Setup
• DHCP - Disabled (for Static IP)
• IP Address - 192.168.1.91
• Subnet Mask -255.255.255.0
• Default Gateway  - 192.168.1.90
• DNS - (Leave as is)

Exit out of Operator Functions, powerfail the ATM, look for the welcome screen try a test transaction.

***Make sure it’s a Ethernet connection not phone line.